Fall in Love with Design Center and IQ: Virtual

Date: Wednesday, September 16th, 2020
Time: 1:00 PM to 1:30 PM

It's time for fall, and time to practice with your digitizing software built right into your machine!  We will be creating this pumpkin, and going over how to create leaves and other fall related designs


Print Friendly    Back to Calendar
Class Description and Materials Needed

This class will show you how to take a coloring book photo and bring it in as a line drawing.  If we have time during class we will also create some extra blocks.  Full instructions will be emailed out on how to create 2 leaf blocks and other blocks besides the one we are doing in class.  We will use our scanning, adding of fills, customizing line components and more.

This class will be taught virtually.  You are welcome to follow along with your machine, or watch the recording after the class to do your project. The materials below are needed if you were planning to follow along with the class. The pumpkin we will be scanning will be emailed out before the class, along with the extra write ups.  These write ups were written by Baby Lock, and may differ a bit from what we do in class.

Your zoom link will be sent out 24 hours before the class.

You will need:

  • Your Luminaire, Solaris, Destiny, Dream Machine, PR 1050x or Valiant. If you are using a 10 needle, your hoop size will be the 9" x 14".
  • Your Scanning Hoop and green magnets
  • Your 9.5" x 9.5" hoop
  • a Piece of 12" square cotton fabric for your stitching background
  • a Piece of 12" Square Batting
  • A Piece of No Show Mesh large enough for your 9.5" x 9.5" Hoop
  • Thread to stitch out a pumpkin
  • Your Embroidery Arm, Bobbin Case, Embroidery Foot
  • Some prewound bobbins
  • Your printed Pumpkin