This project is based on a SweetPea design (required purchase, included in class cost).
It is a beautiful beach design for you to appliqué and embroider on the bag, as well as a side pockets and an embroidered top border.
This design is an ITH (In The Hoop) machine embroidery design. The side and top borders as well as the lining are added with your sewing machine.
The design comes in two sizes - the 6x10 and 7x12 hoops. Both sizes are included in your purchase . The bag is completely lined and has no raw seams. You may do either (but not both) size for this class.
Finished bag sizes are:
6x10 - 19cm h x 38cm w (7.5” x 15”) or 7x12 - 20cm h x 43cm w (8” x 17”)
This project is being divided into two classes. In the first class you will make the front embroidery panel. The second (optional) class will deal with the assembly and completion of the actual bag. The embroidery designs and instructions will be handed out with the first class.
************
COVID Mask requirements
If you are completely vaccinated masks are NOT required. If you are not vaccinated you will still need to wear a mask.
************
Fabric and Cutting Requirements
Please come to class with ALL fabrics and cutting already done at home. There is not enough time available for cutting to be done during the class.
FABRIC REQUIREMENTS
For the 6x10 hoop (160mm x 260mm) hoop
- Fabric A – 1 x (12” x 8”) (front panel of bag - sand)
- Fabric B – 1 x (12” x 4”) (front panel of bag - water)
- Fabric C – 1 x (12” x 8”) (back plain panel of bag)
- Fabric D – 1 x (12” x 6”) (front and back top borders)
- Fabric E – 2 x (7” x 10”) (background - side panels) should be same as borders Fabric D
- Fabric F – 2 x (7” x 13.5”) (pockets – side panels)
- Fabric G – 1 x (3.75” x 33”) (bottom border)
- Fabric H – Cut 1 – lining – *To be cut later – pieces approximately 33cm x 84cm (13” x 33”)
- Fabric I – Cut 2 – 8cm x 50cm (3”x 20”) (straps) If you want longer straps cut accordingly
- Batting 1 – 1 x (12” x 8”) (front panel of bag)
- Batting 2 – 1 x (12” x 8”) (back panel of bag)
- Batting 3 – 1 x (12” x 6”) (front and back top borders)
- Batting 4 – 2 x (7” x 10”) (background - side panels)
- Batting 5 – 1 x (3.75” x 33”) (bottom border)
- There are 9 different fabrics needed for the various appliques (sandals, shells). You can use either traditional fabrics, glitter or whatever you want. The largest piece needed (8" x 6") is for the sandals. Scraps can be used for the other appliques.
Finished dimensions – (7.5” x 15”)
For the 7x12 hoop (180mm x 300mm) hoop
- Fabric A – 1 x (14” x 9”) (front panel of bag - sand)
- Fabric B – 1 x (14” x 4”) (front panel of bag - water)
- Fabric C – 1 x (14” x 9”) (back plain panel of bag)
- Fabric D – 1 x (14” x 9”) (front and back top borders)
- Fabric E – 2 (11” x 8”) (background - side panels) Should be same as border fabric D
- Fabric F – 2 x (8” x 16”) (pockets – side panels)
- Fabric G – 1 x (4” x 38”) (bottom border)
- Fabric H – Cut 1 – lining – *To be cut later –pieces approximately 30.5cm x 96.5cm (12” x 38”)
- Fabric I – Cut 2 – 8cm x 50cm (3”x 20”) (straps) If you want longer straps cut accordingly
- Batting 1 – 1 x (9” x 14”) (front panel of bag)
- Batting 2 – 1x (9” x 14”) (back panel of bag)
- Batting 3 – 1 x (9” x14”) (front and back top borders)
- Batting 4 – 2 x (11” x 8”) (background - side panels)
- Batting 5 – 1 x (4”x38”) (bottom border)
- There are 9 different fabrics needed for the various appliques (sandals, shells). You can use either traditional fabrics, glitter or whatever you want. The largest piece needed (8" x 6") is for the sandals. Scraps can be used for the other appliques.
Finished dimensions – (8” x 17”)
What Else You Need To Bring
You need to bring the following:
- Your embroidery/sewing machine*
- Stabilizer (Floriani Power Mesh or equivalent)**
- Embroidery Threads to match you fabrics (there are potentially 9 different fabrics)**
- Embroidery Bobbin
- USB for the design and instructions*
* We will have a limited number of embroidery/sewing machines available for rent if you unable bring your own machine. For Luminaire/Solaris class machines the rental is $35 for the class. For smaller machines the rental is $30.
** Available for purchase if needed