Call Us at 860-423-6800
http://www.schillersontheweb.com

Floriani Dream Weave Fusible

Starting at $28.99

Floriani's Dream Weave Fusible (White 30 inches x 3yards)
$28.99
Floriani Dream Weave Ultra (30 inches x 3 Yards)
$30.99
Floriani Dream Weave Ultra (30 in x 25 Yards)
$190.00
Floriani Dream Weave Fusible (White - 30 inches x 25 Yards)
$192.99

When adding embroidery to your most delicate fabrics such as silk, satin, lame or chamois, you can experience shredding. This occurs because the fragile fibers of the fabric are not capable of handling the constant penetration of the needle during the embroidery process. This can also occur in fabrics such as Lycra or spandex which are often used in dance uniforms or bathing suits. By fusing Floriani Dream Weave Fusible to the back of the fabric it helps to protect the fabric by giving it more body yet doesn't change the face or drape of the fabric. Also use as a lining in all types of fabrics for suits or garment construction. It is important to remember that Dream Weave is not a stabilizer. It is a very important step to prepping or preparing delicate fabrics for embroidery.

  • Creates a bond with delicate fabrics without changing the face or drape of the fabric
  • Fuse over embroidery to cover scratchy stitches.
  • Keeps fabric from raveling or shredding during the embroidery or stitching process.

Use Floriani Dream Weave Ultra® for adding extra support to light weight or delicate fabrics when stitching dense or large embroidery designs. Floriani Dream Weave Ultra® adds a light layer of support so the embroidery stitches will not cause damage or distortion to the fabric. Fuse Dream Weave Ultra® into place for an instant increase in thread count without adding bulk or changing the drape of the fabric – and use less stabilizer!

Floriani Dream Weave Ultra® can also be used as an interlining for dress and suit weight fabrics for apparel.

   • Great for embroidery on delicate or unstable fabrics.
   • Increases thread count of the fabric without adding bulk.
   • Protects the fabric from needle sheering or damage.
   • Decreases the amount of stabilizer required for the embroidery design.
   • Won’t change the drape of the fabric.
   • Use to fuse over the back of scratchy stitching for soft, supple embroidery!

To use Floriani Dream Weave Fusible:

  1. Cut a piece of the Dream Weave at least one inch larger than the embroidery design area.
  2. Place the fusible side (rough side) to the wrong side of the fabric and press using a low temp, dry iron.
  3. Using the appropriate stabilizer in addition to the Dream Weave, embroider the garment.
  4. If desired, after the embroidery is complete, fuse one layer of the Dream Weave over the back of the design to keep if from scratching your skin.

**This product is not a stabilizer; it is an important step in preparing the fabric for the embroidery or embellishment process. 
**Note: All irons heat differently. Test by fusing a small swatch of Dream Weave Ultra® on a scrap of similar fabric before beginning your project.