Call Us at 860-423-6800
http://www.schillersontheweb.com

Floriani Medium, Heavy and Ultra Heavy Weight Firm Tearaway

Starting at $13.00

Meduim Weight Firm Tearaway 1.5 oz (12" x 10 Yards)
$13.00
Medium Weight Firm Tearaway 1.5 oz (15" x 10 Yards)
$17.00
Medium Weight Firm Tearaway 1.5 oz (20" x 10 Yards)
$19.00
Medium Weight Firm Tearaway 1.5 oz (20" x 100 Yards)
$105.00

Tearaway tears away cleanly to speed production and features a non-stretch, stable foundation. It can be used on any weight of woven with excellent results. Because it's made of top quality materials using the wet-laid-non-directional process, only one layer is needed for most projects. This product is easy to use. Once you've cut the appropriate size, it is hooped to the wrong side of the garment and sewn. Then securely rip off the excess edges from around the embroidery. This tearaway is the recommended product when extra stability is needed with any other Floriani stabilizer. 

Floriani Medium Tearaway is manufactured using a unique process called the "Delta Wet Laid Non-Woven" technique. The benefit of using this method of production is that the product is very solid, when closely examined you will see no thick and/or thin spots. When used as an embroidery stabilizer, it is not necessary to use multiple layers in random directions to support stitches. Medium Tearaway is a 1.5 oz, clean tear stabilizer. It is the best choice for a supplement stabilizer when working on high stitch count designs in conjunction with your other stabilizers such as No Show Nylon Mesh, Heat N Sta® Tearaway or Wet N Stick®. It provides back up support without adding unwanted bulk.

  • Use to support embroidery designs on towels, denim or other "stable" woven fabrics
  • Tears clean from around most embroidery designs
  • Will support about 8,000 stitches on a well-digitized, average size design
  • Use in conjunction with other stabilizers for added support


To use Floriani Tearaway:

  1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
  2. Hoop the stabilizer to the wrong side of the fabric.
  3. Place the embroidery frame on the machine; complete the layout and centering of the design.
  4. If the design to be stitched is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support!
  5. Once the design is complete, remove the hoop and fabric from the machine. Tear away the stabilizer from around the design one layer at a time.